12 SMT lines + 2 DIP lines + 2 soldering lines + 2 test lines + conformal coating line · 2 depaneling routers — 1 million automotive PCBA boards per month See line configuration →
Automotive PCBAMedical PCBAServer & Computing PCBA
Shenzhen, China · IATF 16949 / ISO 13485 / ISO 9001 · SINCE 2018

Automotive & Medical & Computing
PCBA Assembly Difficult boards welcome · Stable at scale

The boards other factories hesitate to quote are our daily work: mainstream 0201 placement, fine-pitch 0.25mm BGA, 2,000+ balls per board. 12 SMT lines place 20 million points per day with full MES traceability — every board is traceable.

12linesSMT assembly lines
100万/月automotive boards per month
20M/dayplacement points per day
0201mainstream component
Why Boruitong

Three reasons we can take the boards others won't

High density, tiny components, mixed varieties — designs that are reasonable on paper but hard to build. Many factories pass on quoting them. We build them, at scale: from automotive PCBA traceability to high-point-count medical and server boards.

01 / PRECISION

Stability at the smallest scale

Mainstream placement of 0201 (0.6×0.3mm) components, down to 01005; fine-pitch BGA down to 0.25mm pitch, up to 2,000+ balls per board.

  • Fine-pitch, high-pin-count, mixed-technology boards
  • Mature process parameter library
  • 20 new YAMAHA mounters: YRM20 ×16, YRM10 ×4
02 / CERTIFIED

Certifications, not adjectives

Three quality systems in one factory — speak automotive, medical and general electronics languages with a single supplier.

  • IATF 16949:2016 automotive QMS (valid to Sep 2029)
  • ISO 13485:2016 medical device QMS (valid to Apr 2029)
  • ISO 9001:2015 quality management (valid to Mar 2029)
03 / TRACEABLE

Every joint has a record

SPI catches print defects, 3D AOI catches placement defects, X-Ray sees under every BGA — all written into MES in real time. Full quality and MES traceability on a dedicated page.

  • First Article Inspection (FAI) before every production run
  • Material–machine–parameter–inspection binding
  • Defects traceable to batch and machine
Cooperation Models

From prototype to volume, two ways to work

Turnkey: send three files and we run the whole line. Consigned: you lock the supply, we lock the quality. Same MES, same three-system quality control.

Turnkey PCBA assembly line with MES dashboard
MODE 01

Turnkey (Full Bill of Materials)

You send three files: Gerber, BOM and test requirements. Component selection, sourcing, kitting, assembly, testing and shipment run through one window.

  • Full BOM kitting with substitution suggestions and shortage alerts
  • IQC on all incoming parts, batch and date-code logged into MES
  • Excess material returned per agreement
Consigned PCBA assembly — FAI first article test
MODE 02

Consigned (Customer-Supplied Parts)

You supply the components; we handle incoming inspection, stencil and program setup, placement, inspection and downstream processes. Ideal for locked supply chains or R&D-stage projects.

  • Every reel scanned and archived, wrong-part poka-yoke
  • MSD baking and storage condition control
  • Stencil tension test and FAI before each run
News

12 lines and 20 new machines — already running, not a plan Order today and you get this capacity now: 20 million placements per day, 1 million automotive PCBA boards per month. Peak-season parallel scheduling keeps lead times controlled without lowering quality standards. Line configuration →

Process

16 steps, every one on record

Each node has its equipment, acceptance criteria and MES record — audit the whole capability and equipment list step by step before you visit.

Incoming IQCDimensions, appearance, batch checks; barcode intake
Stencil tension testVerified before every run for print consistency
Solder paste printingGKG G9+ printers — precise volume, uniform thickness
3D SPI paste inspectionThickness, area, offset judged board by board
High-speed placement20 YRM20/YRM10 machines in line, scanned part verification
FAI first articleFull first-article test before mass production
Feeder recordsPart number, slot, time, operator — one barcode
In-process patrolHourly logs, instant traceability on anomalies
Reflow solderingMulti-zone profiles captured in real time
X-Ray BGA samplingSees voids, shifts, bridges under the package
Inline 3D AOI360° inspection: missing, shifted, cold joints
QA samplingIndependent second gate off the line
DepanelingRouter-based, low stress, burr-free edges
Functional testICT / FCT / RF calibration with data feedback
DIP & through-holeWave soldering + hand soldering, point-by-point inspection
Conformal coating · shipUniform measurable coating; batch-complete release only
Full capability & equipment →
Industries

Five industries, five different kinds of "hard"

Automotive demands process control, medical demands compliance and traceability, computing demands high point counts and thermal reliability, industrial demands long-term supply, consumer demands iteration speed. Each has its own playbook here.

Facility

See 11 real photos before you visit

No stock images — every photo is from our own floor. Equipment models can be verified against nameplates on site, one machine at a time.

GKG G9+ automatic solder paste printer
Paste printingGKG G9+ automatic printer
3D SPI solder paste inspection
3D SPIThickness / area / offset, 100% judged
SMT lines with MES dashboard
SMT floor12 SMT lines · live MES dashboard
YAMAHA high-speed pick-and-place machine
PlacementYAMAHA YRM20 / YRM10 · 20 units
MELT R-1000VAC ten-zone lead-free reflow oven
ReflowMELT R-1000VAC ten-zone oven
Inline 3D AOI inspection area
Inline 3D AOI360° optical inspection
X-Ray BGA solder joint inspection
X-RayBGA joint imaging and judgment
FAI first article tester
FAI / IPQCSmart first-article tester
R&S CMW500 RF test
Functional & RF testR&S CMW500
GAM320 PCB depaneling router
DepanelingGAM320 routing machine
DIP through-hole and hand soldering line
DIP · solderingThrough-hole, soldering and inspection stations
All equipment & lines →
Products

Boards we've built look like this

Real boards by industry (customer markings removed): automotive, industrial/server, consumer wearables, IoT communication, commercial display. The denser the board and finer the pitch, the more it reveals about printing, placement and inspection. All cases →

Automotive core boards, triple panel

Automotive · Vehicle-Grade

Products
Automotive core boards, T-BOX, BMS, cockpit communication boards
System
IATF 16949 · AOI + X-Ray dual release
Capacity
1M boards/month across 12 lines — mid-to-large volumes welcome
Industrial ATX motherboard

Industrial · Server

Products
Industrial ATX, LGA1700 large boards, server storage cards
Traits
Fine-pitch BGA + long-lifecycle supply archive
Key steps
SPI → multi-machine placement → 100% 3D AOI
Smartwatch mainboard

Consumer · Wearables

Products
Smartwatch boards, TWS earbud boards, round wearable PCBs
Traits
Mainstream 0201 (01005 min), dozens-up panels
Key steps
Stencil tension control → high-speed placement → AOI backstop
Communication module quad panel

Communication · IoT

Products
Bluetooth modules, gateway/router boards, IoT communication boards, security main boards
Traits
Shielding-can process, batch-to-batch consistency control
Key steps
Reflow profile archive → X-Ray sampling → batch traceability
Commercial display board with heatsink

Commercial Display

Products
Display mainboards, all-in-one machine boards
Traits
Heatsink modules, long-run stability first
Key steps
DIP soldering → conformal coating → functional test

Photos show representative boards and processes. Layer counts, point counts and processes for your product are subject to engineering review. Customer data is kept strictly confidential; no identifiable markings are shown.

Certification

Three certificates, numbers you can verify

IATF 16949, ISO 13485, ISO 9001 — certificate numbers, scope and validity are all published. Audits and document reviews welcome.

ISO 9001 certificate (04526Q00947R002)
ISO 9001 · Star Universe · valid to 2029-03-26
IATF 16949 certificate (T202675)
IATF 16949 · NQA · valid to 2029-09-13
ISO 13485 certificate (F06726MD00058R053)
ISO 13485 · ACM · valid to 2029-04-19
Download Certificates Pack (PDF, all three certificates)
FAQ

The 5 questions customers ask most

If yours isn't here, message us on WhatsApp — an engineer answers directly, not a bot.

What types of PCBA assembly does Boruitong offer?

Five categories: automotive electronics, computing/server boards, industrial control, medical electronics and consumer electronics. Capabilities include fine-pitch BGA (0.25mm minimum pitch, 2,000+ balls per board), mainstream 0201 placement (01005 supported), double-sided mixed assembly, DIP/through-hole soldering, conformal coating and functional testing.

Turnkey or consigned — which model should I choose?

Turnkey: you provide Gerber, BOM and test requirements; we handle sourcing, kitting, assembly, testing and shipment. Consigned: you supply components; we handle incoming inspection, placement and testing. Both share the same MES traceability and quality system; quotations and lead times differ, and you can switch by project stage.

What is your MOQ and prototype lead time?

Prototypes from 5 boards. Standard prototypes in 3–5 working days, small batches in 5–7 working days; volume is scheduled by placement points and component readiness. Expedited service available after engineering review.

How can I trust your quality?

Three certificates with published numbers, scope and validity — all current. In process: 100% SPI, inline 3D AOI, X-Ray for BGA, and customer-confirmed FAI before production. Every board's materials, machines, parameters and inspections are recorded in MES.

Do you support factory audits?

Yes — visit us in Bao'an, Shenzhen, about 20 minutes from Shenzhen Bao'an International Airport, or review documents remotely. You can verify every equipment model against its nameplate on site.

WhatsApp / Call +86 136-8258-5455All 10 FAQs →

Send Gerber & BOM — executable quote within 24 hours

Before quoting, our engineers run a DFM review — we quote what we can build, and say so plainly when we can't, with risks stated upfront instead of surfacing after production. 12 SMT lines run in parallel; 1 million automotive PCBA boards per month. Your volume schedule fits here.

24-hour executable quote · Direct line to sales lead — no middlemen

Shuangxin Li · VP, Sales & Quotation
WhatsApp: +86 136-8258-5455
Same number for phone & WeChat · Send Gerber + BOM for a quote
Chat on WhatsApp Email: coyo86@126.com

PCBA Quotation Request

Gerber, BOM and test requirements welcome — reply within 24 hours. Urgent? Message +86 136-8258-5455 directly.
PDF / ZIP / RAR / XLSX, up to 25 MB total. Larger files: send a download link in the message.